Havoc
03-18-2008, 03:18 AM
Ok, so me and a friend of mine were bored sunday and we decided to put some lights in my car.... Ok, it was planned, no big deal. Here are some pictures of the debatchery that followed.
-Note, it's my friend in the pictures, not me-
Center console partly removed getting some custom wiring done to make the wires just a little longer
http://i9.photobucket.com/albums/a99/PeanutGuy/IMG_0579.jpg
Closeup of the console in peices
http://i9.photobucket.com/albums/a99/PeanutGuy/IMG_0580.jpg
The light we used.... Cold Cathode light, bought from Memory Express here in Calgary
http://i9.photobucket.com/albums/a99/PeanutGuy/IMG_0588.jpg
Mounting them under the glove compartment
http://i9.photobucket.com/albums/a99/PeanutGuy/IMG_0590.jpg
View of it under the dash on the driver's side
http://i9.photobucket.com/albums/a99/PeanutGuy/IMG_0582.jpg
The Switch. Don't worry, it will be moved later, but it took us 6 hours to get all this done, and we just wanted to make sure it worked before doing any custom switches.
http://i9.photobucket.com/albums/a99/PeanutGuy/IMG_0601.jpg
What the Lights look like while lit... notice that green goes towards the outside of the car
http://i9.photobucket.com/albums/a99/PeanutGuy/IMG_0593.jpg
Inside of the passenger side while all lit up
http://i9.photobucket.com/albums/a99/PeanutGuy/IMG_0610.jpg
Sort of the whole picture.
http://i9.photobucket.com/albums/a99/PeanutGuy/IMG_0615.jpg
So yeah. Thats what I did on the weekend. Wired the lights into the cigar lighter, lights are "velcroed" in. All in all, cost me about 6 hours (first time, took a while to get trim off and tripes to Circuit City for supplies) and about 40$.
Woot, Halos next? I think so.
Lucas
-Note, it's my friend in the pictures, not me-
Center console partly removed getting some custom wiring done to make the wires just a little longer
http://i9.photobucket.com/albums/a99/PeanutGuy/IMG_0579.jpg
Closeup of the console in peices
http://i9.photobucket.com/albums/a99/PeanutGuy/IMG_0580.jpg
The light we used.... Cold Cathode light, bought from Memory Express here in Calgary
http://i9.photobucket.com/albums/a99/PeanutGuy/IMG_0588.jpg
Mounting them under the glove compartment
http://i9.photobucket.com/albums/a99/PeanutGuy/IMG_0590.jpg
View of it under the dash on the driver's side
http://i9.photobucket.com/albums/a99/PeanutGuy/IMG_0582.jpg
The Switch. Don't worry, it will be moved later, but it took us 6 hours to get all this done, and we just wanted to make sure it worked before doing any custom switches.
http://i9.photobucket.com/albums/a99/PeanutGuy/IMG_0601.jpg
What the Lights look like while lit... notice that green goes towards the outside of the car
http://i9.photobucket.com/albums/a99/PeanutGuy/IMG_0593.jpg
Inside of the passenger side while all lit up
http://i9.photobucket.com/albums/a99/PeanutGuy/IMG_0610.jpg
Sort of the whole picture.
http://i9.photobucket.com/albums/a99/PeanutGuy/IMG_0615.jpg
So yeah. Thats what I did on the weekend. Wired the lights into the cigar lighter, lights are "velcroed" in. All in all, cost me about 6 hours (first time, took a while to get trim off and tripes to Circuit City for supplies) and about 40$.
Woot, Halos next? I think so.
Lucas