Need Help with dial surrounds

[ChrisM]

Hi guys,

I'm right in the middle of trying to install my chrome dial surrounds, got my full dash apart at the moment and wanting to get it finished before it get dark. I know some of you's have already installed the surrounds, I'm hoping you could help me.

I've got the binicale split in two, It looks like the only way of getting the surround for the speedo in, is to split the clear lense from the black surround, if that makes sence? I'm really not wanting to damage anything, is there an easy way of seperating the lense? Or is there another way getting the large chrome surround in that I'm over looking?

[jezport]

You shoud be able to squeeze the ring through carefuly.

[ChrisM]

Thanks for confirming that for me jezport;

Got them in now, looking good, I'm now in the process of cleaning off all my finger prints from the lense.

I think I've spent the last hour and a half scratching my head deciding weither or not to attack the lence with a stanley knife or not, didn't want to damage it, but I also didn't want to damage the chrome surround by squeezing it in.

I'll try and post of pics later, for anyone that wants to see them.

[pwhitelock]

Glad you got it sorted Chris. I havent been on any of the forums for days and only just seen this. Iv seen these rings on Jamies cat and they look good. Id fit them but i have the carbon fibre surround and these wont fit with that in place. If i can be bothered ill take speedo out, remove CF, spray it silver chrome (or maybe just silver) then stick CF back in place. Need speedo re calibrating anyway, but my to do list is too big at the moment :rolleyes:

[ChrisM]

I never thought of recalibrating the dials, my speedo is like 5mph out. I took plenty of photos with my phone, so some are a bit blured here are just some of them:

http://i197.photobucket.com/albums/aa51/mm1ptt/Cougar/09032008222.jpg
http://i197.photobucket.com/albums/aa51/mm1ptt/Cougar/09032008221.jpg
http://i197.photobucket.com/albums/aa51/mm1ptt/Cougar/09032008224.jpg
http://i197.photobucket.com/albums/aa51/mm1ptt/Cougar/09032008225.jpg

The surround for the right heater switch doesn't sit in correctly, will need to get some glue for that one I think.

[FlamencoAssassin]

Very nice Chris, but where's the ring for your headlight switch?:facepalm:

:cover:

[ChrisM]

Very nice Chris, but where's the ring for your headlight switch?:facepalm:

:cover:

I know! Would of been nice if that was included with in the switch rings, I dont know you can get one for the light switch. It isn't that bad cause its on the other side of the steering wheel. What does look bad is the switch for headlight height and dash dimmer don't have a surrounds.

[FlamencoAssassin]

I think Alan (Pid_16V) has one on his headlight switch.

What does look bad is the switch for headlight height and dash dimmer don't have a surrounds.
:goofy: The list never ends eh.:rofl:

[burton160w]

Oh my god your car is... backwards, it's making me sick :puke:

Haha :cover: I really can't picture how uncomfortable and awkward it would be to shift with my left hand? Maybe just cause I was raised righty?

but that looks really good! I just swapped mine with a C2 cluster and I'll you, the chrome rings is what really sets the gauge off. nice job!

Edit: I just realized I was in UK Cougar so I'm going to :gtfo:, didn't mean to insult you blokes (did I use it correctly), just clicked on new threads.

[Pid_16V]

Not a brilliant piccy but the ring is in there, the company sent me the wrong kit originally (vauxhall iirc) and one of the rings was just right for this job

http://i130.photobucket.com/albums/p265/alpiduck/dash%20rings/lightswitch.jpg

[pwhitelock]

Edit: I just realized I was in UK Cougar so I'm going to :gtfo:, didn't mean to insult you blokes (did I use it correctly), just clicked on new threads.

We are all friendly, glad to have people popping in and commenting :biggrin:

[speed-demon]

Oh my god your car is... backwards, it's making me sick :puke:

Haha :cover: I really can't picture how uncomfortable and awkward it would be to shift with my left hand? Maybe just cause I was raised righty?

but that looks really good! I just swapped mine with a C2 cluster and I'll you, the chrome rings is what really sets the gauge off. nice job!

Edit: I just realized I was in UK Cougar so I'm going to :gtfo:, didn't mean to insult you blokes (did I use it correctly), just clicked on new threads.


same here mate i'm comin over your way to new york then orlando for 2 weeks my fiancee dads renting a motor out there lookin at a dodge viper for a few days,shifting even auto will be odd to me but can't wait;)

nice job mate well done:cool::bowdown:

[burton160w]

aww :drool: very nice, very nice.

Weird question, why New York? I'm assuming here New York City, and maybe it's just cause I live right outside it - but I just couldn't see the point of a vacation there... again, I live there so that may have something to do with it.

Anyways, Orlando is always fun! Enjoy and welcome to the States - we're really not all the asshole our President makes us out to be. :)

[speed-demon]

aww :drool: very nice, very nice.

Weird question, why New York? I'm assuming here New York City, and maybe it's just cause I live right outside it - but I just couldn't see the point of a vacation there... again, I live there so that may have something to do with it.

Anyways, Orlando is always fun! Enjoy and welcome to the States - we're really not all the asshole our President makes us out to be. :)

empire state bulidin statue of libertity we are spendin four days there then onto orlando for ten can't wait my first trip to the US i wanna move to the US but my lass aint havin any of it:rofl:

soz off topic:goofy:

[Beggers20]

Hi,
Ive had a set of these for about a year now but dont have a clue how to fit them. I assumed they would come with a 3m backing but they didnt. How have you guys fitted them?