View Full Version : 3.0L questions
cougastyle00
03-04-2008, 10:00 PM
Ok guys and girls so i think I have a cracked head as im leaking anti-freeze and oil, or it could be the head gasket dont know for sure yet, if it turns out that the head is cracked im considering going the 3L route my questions are.
1) What car does the 3L generally come out of
2) What modifications have to be done in order to make the 3L fit, mounting points, transmission, etc...etc...
3) How much HP does the 3L have over the 2.5L
BigBalledOX
03-04-2008, 10:01 PM
Search. SERIOUSLY.
jaged
03-04-2008, 10:09 PM
you done even have to search. all of your questions can be answered in the FAQ's at the top of this section
taurus
alt bracket mount
around 200
streetracer8605
03-05-2008, 01:37 AM
you done even have to search. all of your questions can be answered in the FAQ's at the top of this section
taurus
alt bracket mount
around 200
and the part for the tranny needs modded, can't think of what it's called at the moment bc i'm tired. however, this is all covered at the top of the forum so your answers are there even if your too lazy to search. do some reading, you'll find more info than you can imagine.
fordrule
03-05-2008, 05:08 AM
crank bushing needs to be cut off if you are using a manual trans, not needed if using at autotragic
cougastyle00
03-06-2008, 12:37 AM
Thanks for replies, I have done some searching but nothing extensive. I really just wanted to see what other people had to say about those questions but thanks again for the replies.