PDA

View Full Version : head gasket?


1cougr2nv
09-13-2007, 12:46 PM
K well im in the process of replacing my headgasket and i was looking around for different ones. I came across the one on zxtuner which they had a 3 layer and 4 layer one available. My question is would i be better off sticking with a stock head gasket or should i get an aftermarket one. I drive the car hard most of the times and i dont want to replace the headgasket to go and blow again a year from now. So will any of these aftermarket ones be better off withstanding harder driving?

Thanx

Turbo Zetec 'tour
09-13-2007, 04:50 PM
the factory ford head gasket is a multi-layer gasket and has been proven to withstand 300HP on the focus. if you are concerned about it and not worried too much about price then go to massivespeedsystem.com (https://ssl.perfora.net/www.massivespeedsystem.com/sess/utn;jsessionid=1546e9a1d221928/shopdata/index.shopscript) and browse the focus section for the cometic head gasket.


Search Engine Friendly URLs by vBSEO 3.2.0 RC5