View Full Version : WTB Poly Filled Rear Motor Mount
MercCoug99
09-13-2007, 03:34 AM
Title pretty much says it all.
Needs to fit a 99 V6 MTX
Just hit me up with a PM if you have one
Thanks
Mike
1veryfastvr4
09-13-2007, 12:48 PM
i think i have one from '00 mtx if that works..... let me kno
aircougar1
09-15-2007, 05:32 AM
i think i have one from '00 mtx if that works..... let me kno
It should work fine...:)
MercCoug99
09-25-2007, 07:58 PM
bump for edit
jaged
09-25-2007, 08:26 PM
you could fill it yourself. its not hard to do and will prolly cost you the same if not less than buying one
gamiller
09-26-2007, 12:48 AM
I'm filling mine this weekend. I can do another set. I could ship the leftover urethane for a fair price.
1veryfastvr4
09-26-2007, 11:55 AM
where is everyone finding the urethane? i cant seem to find it anywhere
CincyZetec
09-26-2007, 12:28 PM
you could fill it yourself. its not hard to do and will prolly cost you the same if not less than buying one
how would one go about doing this?
jaged
09-26-2007, 12:45 PM
buy the urathane, drill holes though all the dimples on the mount so that the liquid urathane can flow to the other side, duct tape off one side of the mount, fill, let harden
1veryfastvr4
09-26-2007, 01:10 PM
where is everyone finding the urethane? i cant seem to find it anywhere
bump
gamiller
09-26-2007, 02:48 PM
i bought mine from McMaster-Carr in Atlanta. You want what is known as a casting compound (http://www.mcmaster.com/nav/enter.asp?pagenum=3495). There are several options for hardness and curing (i.e. drying) time.
CincyZetec
09-26-2007, 02:55 PM
what's the difference in the different hardnesses? (other than one being harder than another) what difference does it make for the car?
jaged
09-26-2007, 03:05 PM
harder = rougher ride, more vibration translated to the car
i have a metal front mount and a filled rear and my car rides a lot stiffer and vibrates more than badazz's who has filled front and rear
gamiller
09-26-2007, 06:55 PM
Your other options are:
* Purchase new SVT motor mounts
* Purchase "inserts" that fit the front SVT motor mount
H.D. Motor Mount Inserts (2 piece) K433B $19.50
SVT Motor Mount (front) K433A $69.50
SVT Motor Mount (rear) K433C $95.45
MercCoug99
09-28-2007, 02:42 AM
Your other options are:
* Purchase new SVT motor mounts
* Purchase "inserts" that fit the front SVT motor mount
just in case anyone is going to do the insets on the front mount its cheaper to buy the mount from teamford it was like $45 iirc and then the inserts from BATinc.
thought i would throw that out there