more problems sick of the clicking

[JpFiZzAL]

so ever since i had my tranny overhauled and got the spec stage 2 installed my tranny would click or tap whenever in neutral with clutch pedal let out. when u push it in it goes away. i brought my car back to the shop and they said it was thethrowout bearing that came with the clutch kit and that they werent responsible. so for about 10 k miles i drove and rove with no problems. Now tonight i takeoff at a light and i ripped it to about 5 grand when the clutch slipped so i pushed it in and shifted and it drove fine from there on. my question is though now ever since it slipped that noise is about twenty times louder almost ike a rod knock.Also the car seems to shift rougher and just not right. Could my clutch possible be totally gone after 10 k? is there any warranty? and since im going to have to pull the tranny what should i change?

im tired of tranny problems it seems i only break trannys and alternators in the three years i have owned this car i love it thought still lol

[B3NN3TT]

Sounds like you are baking your TOB.

Most any clutch will chatter a little in neutral. It's part of the process.

[Quickcat14]

My car does the exact same thing and it shifts rough too just like he's saying what is the TOB I dont know a whole lot about clutchs but I do belive mine needs to be replaced though

[B3NN3TT]

Throw
Out
Bearing

[Quickcat14]

What does the TOB bearing do ? does its slowly releas the clutch or what and how do you break it

[JpFiZzAL]

when u say baking my throwout bearing i assume you mean breaking it. im a mechanic or i sohuld say mechanic in training and everything else tht has broke on this car has been no problem but i havent fully learned how to rebuild a transmission but i know how to pull it. should i just pull the tranny and change my slave cylinde r/throwout bearing im not sur ebut i think that they are integrated as one unit. I did some searching and i c that the piece spec supplies with their clutches is garbage so should i jsut replace this and then ill be set.? Also it feels like the clutch is not grabbing good would that be because the throwout bearing is shot? or because i wor ethe clutch out after on 10k miles? sorry for all the typos and questions