View Full Version : any idea?
slurpee
11-10-2006, 10:13 AM
I pulled the alt, and had to pull the steering arm...well, the arm didn't go back in, so I pushed it in a little to align the hole again. This morning I drove the car, the steering is way off. I have to steer right to go straight. Now, turning left, the car will turn, but sort of want to go straight to. So, I'm in a pinch, I'm suppose to leave tonight to chicago....so, I'm thinking of trying to put the wheel straight and pull the arm and adjust the wheel to straight again.
Moraki
11-10-2006, 10:15 AM
no clue... never had an issue like that. Is everything bolted back in place?
I guess just inspect that steering arm.... see how the other end looks .../shrug
bensenvill
11-10-2006, 10:25 AM
I had that seconds before my wheel snapped off.
slurpee
11-10-2006, 10:27 AM
gggrrreeaattt. was it the wheel bearing?
Phantom
11-10-2006, 10:29 AM
Well, that's scary, Terry.
So you probably only had to remove one arm right? Both wheels are facing the same direction right? We don't need any wheels snapping off again...
Good luck. I just hope you don't have any major problems with it.
sonza68
11-10-2006, 10:41 AM
I'd double check it if you can and see if anything looks out of place. If you can't find the problem I've bring it somewhere to get an alignment before driving to Chicago.
slurpee
11-10-2006, 10:50 AM
that's what I was thinkin'....wonder if dobbs can do it with that short of notice.
sonza68
11-10-2006, 11:02 AM
They should be able to. You might try giving them a call and see what they say.
slurpee
11-10-2006, 11:07 AM
got an appointment at 3:30 today....pray that's the problem!!!
Moraki
11-10-2006, 11:50 AM
Pray if thats the problem they have the part.... at 3:30 they arent going to have the time for a part run... unless your lucky.