SOLD! TRUE Borla SS Dual Exit Phantom Tip Exhaust

[DanG]

Here it is, folks- Once in a long while, you'll see one. This is NOT the popular Trubendz Borla system. This is a TRUE Borla system, manufactured and shipped from Borla themselves.

I bought this in the summer of 1999... Carried the 1,000,000 mile warranty, and it still holds to this day!

Borla part number 14821, the stainless polished rolled "phantom tip". True old-timers will recognize these tips as the "revised" phantom tips- That's because both of the tip sections were replaced by Borla due to faulty welds in the hangars. Borla customer service took care of me, they'll take care of you should anything (unlikely) happen to this system.

Includes all clamping hardware as well as rubber hangers to mount the rear tips (this system does NOT use factory hangers).

Sound is UNMATCHED to this day. Almost inperceptable at idle & cruising. Only sounds off when you want it to!

http://dglicoes.home.comcast.net/Borla1.jpg

http://dglicoes.home.comcast.net/Borla2.jpg

http://dglicoes.home.comcast.net/Borla3.jpg

http://dglicoes.home.comcast.net/Borla4.jpg

My turbo has no hope of ever using this system again. I've moved on to a 3" system, so you'd better jump on this since one's come along.

$770 new... (http://www.speedyperformanceparts.com/borla_me_cougar_exhaust-system_z.html)

$425.00 OBO. $50 LESS than a new SS Borla Trubendz!

Buyer to pay actual shipping costs by his/her choice of methods.

[THEKID]

Removal of stock exhaust and Installation of Duals is easy to do?
Do you have any soundclips?
Pretty strong interest.. Whats shipping go for on something like this?

-alex

[DanG]

Yes, a novice can do it. Requires you to jack the car up from the rear, put it on jackstands (for safety). Two bolts at the rear of the catalytic converter section, and the 4 hangers of the stock system. Whole thing comes out, this goes in using the same hangers, and the frame for the tail pipe sections.

I apologize, but I do not have sound clips. This system has not been on a car in years. Been keeping it for sentimental reasons until I realized that with my turbo, there's no going back!

I would disassemble it for shipping and pack it in a few boxes. PM me with your zip and I will try to get a number for you.

[THEKID]

So how would I get sound clips, and why do I need them?.
Thanks

-Alex

[Gooch1962]

Sounds interesting, How much would shipping be to 48838

[james99]

So how would I get sound clips, and why do I need them?.
Thanks

-Alex


sound clips are just a recording of how the exhaust sounds on a running car. its not something you need.

[THEKID]

OHHH! Holy S*** am I stupid... I was thinking of clips that attached to the system. I was thinking it was something like the clamps.. Ill watch my stupidity from now on..

[DanG]

For all that have PMed me:


ZIP Code / Charge
14224 / $28.65

13492 / $32.48

07866 / $28.65

48838 / $34.84

The box (it's already packed and ready to go) is 36x25x13, weighs 44lbs. Shipping from 20151.

Thanks everyone for their interest in the kit. I have the order in which people PMed me with their interest, so please continue to PM me for transaction details. First come gets first dibs, second, then so on.

[Comando489]

how much for that sub box u have in the first picture? haha

[DanG]

MINE! You can't have it! <snarl>

I just bought it off another member- I haven't even had the chance to put it in and test it yet!

how much for that sub box u have in the first picture? haha

[Esskate8]

You got a pm!

[tnkgurl]

how much for that sub box u have in the first picture? haha

However, said member still has another sub to get rid of. This one fits in the driver's side wheel well. :wave:

Sorry for the hijack, Dan! :)

[DanG]

No prob. PM tnkgurl for the driver's side.

My driver's side is kinda taked up by the battery and intercooler tank... :cool:

[DanG]

SOLD. Thanks for everyone for their interest!