zetec vct problems - Page 6

unkmstq · 01-22-2007, 01:18 AM

is there anyone out there that can answer this for me?????

cougarprophet · 01-22-2007, 01:20 PM

Quote:

Originally Posted by unkmstq

ok so i have a different probably dumb question........i havent looked at the cylinder walls of my motor yet but when i do i wanna have the info i need if the walls r still good.......will the je pistons and eagle h beam rods work in my 98 zetec block?? they sell them for the 2000 up focus.....the blocks r the same tho rite???

sorry for the delayed responce, but as along as they are for the zetec they should fit...u may need to bore out the walls a bit ( cant remember) but yes they work on all zetec blocks

unkmstq · 01-23-2007, 01:22 PM

ThankQ

Quote:

Originally Posted by cougarprophet

sorry for the delayed responce, but as along as they are for the zetec they should fit...u may need to bore out the walls a bit ( cant remember) but yes they work on all zetec blocks

cbman · 01-23-2007, 06:20 PM

I bought the eagle rods and custom 8.5:1 wiseco pistons that were for the focus, but they fit fine.
Except, they were .007" oversized so you have to have the cylinders bored and honed. Also, the pistons were sticking out of the deck .015", but everything is ok so far. I found them at http://www.raceeng.com

andivoo · 04-11-2008, 02:14 PM

What happened after that

01-22-2007, 01:18 AM	#51 (permalink)
unkmstq NECO Member Join Date: Oct 2006 Posts: 29	Re: zetec vct problems is there anyone out there that can answer this for me?????

01-23-2007, 06:20 PM	#54 (permalink)
cbman NECO Member Join Date: Aug 2005 Location: Canton, Ohio Posts: 275	Re: zetec vct problems I bought the eagle rods and custom 8.5:1 wiseco pistons that were for the focus, but they fit fine. Except, they were .007" oversized so you have to have the cylinders bored and honed. Also, the pistons were sticking out of the deck .015", but everything is ok so far. I found them at http://www.raceeng.com __________________ 99 Black I-4 MTX: Turbocharged, 2.5" Trubendz Exhaust, SCT XCalibrator2 Check out my Band, be our friend: Townhouse Suite

04-11-2008, 02:14 PM	#55 (permalink)
andivoo NECO Member Join Date: Aug 2005 Posts: 4	Re: zetec vct problems What happened after that

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)