|
Re: need some input on a caliper issue
Here's a couple options:
Buy new ones from ford... expensive and no warranty
Buy new ones from autozone, napa, advance.... cheaper but with warranty
Buy some from junkyard, might not work buy can return for another set.... a waste of time IMO.
Use what you got and hope it works.
Personally if you are strapped for cash I would use what you have but buy a set from autozone and keep until you get the swap complete. Have the new set ready and waiting in case there is a problem. You don't want to have to run to autozone or wait for parts if they don't have them in stock. Return them later after you are satisfied with what you have.
__________________
1999 Laser Red MTX
14.509 1/4 2.265 60'
2002 3L with SVT UIM, SVT LIM no secondaries, SVT Cams, SVT TB, 24# injectors, WR Headers & y-pipe, AEM Intake, SVT Clutch, Fidanza flywheel, Clevite rod bearings, ST200 valve springs, Underdrive pulleys, Escape oil pan, DMD, Magnecor KV85 Comp Wires, Polished timing cover-valve covers-MAF-TStat, Torsen LSD, Focus shift tower & forks, RP syncromax, SVT ECU, SCT Flip Chip, B&M Shifter, OMP FSTB, Mirko RSTB, Roush RSB, Roush Floor Mats, 2.5" Trubendz
|