Looking to install 2 amplifiers before Fest. One 800W RMS mono, and a 400W RMS 4 Channel. So far I have the battery relocation kit from Steeda, which I plan on using for a dual battery, rather than a relocation. This will be hooked to a carpc, with a 5.1 sound card. So the 4 channel amp, will have 4 independant channels. And the sub will have it's own output.
This is what I received from Steeda. What else do I need?
Quoted from the GB thread:
Quote:
Originally Posted by SteedaSVT
I am offering 0/1 gauge battery relocations to the contour guys on CEG and figured I would offer them on here.
The link to the CEG Group buy: Battery Relocation kit - CEG Forums
This is what the kit includes:
20ft of red 0gauge power wire
4ft of black 0gauge power wire
Anl fuse holder with fuse(250amp)
25ft of split loom to protect the 0gauge
2 battery terminals ***If you would rather have side mount terminals let me know (either gold or platium depends on availbility)
2 0gauge set screw heavy duty ring terminals (either gold or platium depends on availbility)
3 0gauge crimp connectors
Fused distorbution block with 4 outputs (either gold or platium depends on availbility)
4 60amp agu fuses
10 wire ties with rings to screw into place if needed |
What else will I need to power the amps? What can I use? I've been trying to lay it all out and figure it out, but i'm just not to sure?