Quote:
Originally Posted by wolfgraj
I have some concerns about using a newer (oval ported) motor. In this case I will have to remove the heads from the block for porting.
|
Many people have done the porting with the heads still installed. If you take the proper precautions, you'll have no concerns. Though, IMO, the ends do not justify the means - it's a lot of work.
Quote:
Originally Posted by wolfgraj
The alternative is use the LIM off the 2.5 and the UIM from the 3.0? This would entail what you were explaining before?
|
If you're talking about the UIM from a 3L ovalport, it will not bolt to a 2.5 LIM.
Quote:
Originally Posted by SpookSVT
I'd highly recommend getting an account over on FCO and view some of recent threads and start your own should you have any more questions.
|
Just be careful of the questions that you ask and be sure to not disagree or offer any counterpoints to anything Dom says.
