NECO Forums - View Single Post

gamiller · 08-03-2007, 05:50 PM

Everything fits quite snugly!

If installing this kit in a Cougar, note the following:
* We did not use the 3" hose elbow, but we needed a second 2.5" to 3" adapter with clamps.
* We also needed another section of pipe. [Dan, you remember why?]
* We found that the BAT MAF adapter fit better than the one in the kit.
* We did not need use the IACV bung on the piping.
* The BOV needs at least 3/8" diameter hose from the vacuum booster to open.
* Only one lower O2 bung is present. My other lower O2 is dangling in the wind.

08-03-2007, 05:50 PM	#9 (permalink)
gamiller Emission Test Flunkee Join Date: Jun 2001 Location: Fairfax, VA Posts: 2,706 Blog Entries: 3	Re: All or Nothing: My 3L Turbo Install Everything fits quite snugly! If installing this kit in a Cougar, note the following: * We did not use the 3" hose elbow, but we needed a second 2.5" to 3" adapter with clamps. * We also needed another section of pipe. [Dan, you remember why?] * We found that the BAT MAF adapter fit better than the one in the kit. * We did not need use the IACV bung on the piping. * The BOV needs at least 3/8" diameter hose from the vacuum booster to open. * Only one lower O2 bung is present. My other lower O2 is dangling in the wind. __________________ Roush Performance Suspension Nautilus Performance Stage 3 Turbo Kit Last edited by gamiller; 06-21-2008 at 09:59 PM.