NECO Forums - View Single Post

Blackcoog · 03-16-2007, 11:14 AM

I'm using a secondary 6 rib belt. I think the belt slip is due to oil on the belt and pulleys. The oil line was a bit loose on initial startup and covered that side of the engine. This would explain the slipping and the lack of noise. I'll spray it down with degreaser and try it again to see if there is any change. If there is still a slipping I may add another roller as Tom suggested. It does have a decent amount of contact area now so it should be ok once the oil is cleaned off.

03-16-2007, 11:14 AM	#254 (permalink)
Blackcoog 3L Install Maestro Join Date: Oct 2000 Location: Minneapolis, MN Posts: 4,667	Re: Interest in Supercharger setup I'm using a secondary 6 rib belt. I think the belt slip is due to oil on the belt and pulleys. The oil line was a bit loose on initial startup and covered that side of the engine. This would explain the slipping and the lack of noise. I'll spray it down with degreaser and try it again to see if there is any change. If there is still a slipping I may add another roller as Tom suggested. It does have a decent amount of contact area now so it should be ok once the oil is cleaned off. __________________ Current Rides 1999 MTX Cougar, 3L Supercharged 325hp and 278tq 1999 SVT Contour, Ported 3L Visit: http://www.3lduratec.com For info on ready to drop in 3L's and our supercharger kit.