NECO Forums - View Single Post

Blackcoog · 02-14-2007, 08:55 AM

Sounds goood Jason.

I dropped the car off yesterday to have the first set of brackets finished up. I was able to figure out a way around the timing cover issues I was having with the new timing covers. Turns out I can run a slightly smaller pulley on the engine side and clear the tensioner that was in the way so things should be good. I'll run a slightly smaller pulley on the supercharger to make up for it. I was told the brackets should be done soon (few days) so I'll let you know as soon as it's finished up and get a working unit on my car.

02-14-2007, 08:55 AM	#191 (permalink)
Blackcoog 3L Install Maestro Join Date: Oct 2000 Location: Minneapolis, MN Posts: 4,606	Re: Interest in Supercharger setup Sounds goood Jason. I dropped the car off yesterday to have the first set of brackets finished up. I was able to figure out a way around the timing cover issues I was having with the new timing covers. Turns out I can run a slightly smaller pulley on the engine side and clear the tensioner that was in the way so things should be good. I'll run a slightly smaller pulley on the supercharger to make up for it. I was told the brackets should be done soon (few days) so I'll let you know as soon as it's finished up and get a working unit on my car. __________________ Current Rides 1999 MTX Cougar, 3L Supercharged 325hp and 278tq 1999 SVT Contour, Ported 3L Visit: http://www.3lduratec.com For info on ready to drop in 3L's and our supercharger kit.