NECO Forums - View Single Post

Seawulf · 11-09-2006, 12:38 AM

I think we got our oil-T at Napa, but can't remember.

As for the filter...yeah, Ebay would have a bunch. Just order one to fit the diameter pipe you use or if it hooks up to the maf. My first filter, I got from Autozone. They sell a bunch of cheap paper cone filters for the Honda crowd, but it fit right onto the MAF so I used that til I found a K&N style filter.

As for what to weld in the oil pan...basically it needs to be a fitting that will screw onto the pipe for your oil return. I have a 3/8 inch hose for my oil return and we welded just a regular nut to the oil pan that was the right thread. The oil fittings were all bought at Napa.

11-09-2006, 12:38 AM	#12 (permalink)
Seawulf Moderator Join Date: Jan 2002 Posts: 829	Re: Turbo FAQ I think we got our oil-T at Napa, but can't remember. As for the filter...yeah, Ebay would have a bunch. Just order one to fit the diameter pipe you use or if it hooks up to the maf. My first filter, I got from Autozone. They sell a bunch of cheap paper cone filters for the Honda crowd, but it fit right onto the MAF so I used that til I found a K&N style filter. As for what to weld in the oil pan...basically it needs to be a fitting that will screw onto the pipe for your oil return. I have a 3/8 inch hose for my oil return and we welded just a regular nut to the oil pan that was the right thread. The oil fittings were all bought at Napa. __________________ 2000 Rio Red I4 Cougar 200whp & 210wtq at 9psi-Street 254whp & 276wtq with a NX 35shot-Track WRX TDO4 Turbo , Mitsubishi Starion Intercooler, Sawed-Off Short Throw Shifter, Freedom Design Strut Tower Bar, 17" ZN Rims, Roush Springs, HKS Super-Sequential BOV, Nitrous Express 35 shot, Esslinger Cam Gears, Full 3" exhaust, StreetFlight Chip Last edited by Seawulf; 11-09-2006 at 12:46 AM.